LEYUN · SITE SPEC & COMPONENT LIBRARY独立站技术规范手册

Material Comparison Table Template for Industrial Products

Section:DATA TABLE SPEC · Reviewed:2026-11-20 · Template asset

Key takeawayThis section defines the structure template, field dictionary, integration points and compliance boundaries for 「Material Comparison Table Template for Industrial Products」 in DATA TABLE SPEC. Templates are for reference only; verify local regulations and platform rules before launch.

Industries and use cases

  • Categories where material choice is a primary buying decision
  • Sites that must explain how different materials perform and where they apply
  • Product lines that combine metals, plastics and composites
  • Cases involving corrosion resistance, temperature resistance or wear resistance
Template / code snippethtml
<table class="mat-table">
  <caption>${modelCode} 可选材质与适用工况</caption>
  <thead>
    <tr>
      <th scope="col">材质</th>
      <th scope="col">牌号</th>
      <th scope="col">适用温度</th>
      <th scope="col">耐腐蚀性</th>
      <th scope="col">适用场景</th>
    </tr>
  </thead>
  <tbody>
    <tr>
      <th scope="row">碳钢</th>
      <td>Q235 / Q345</td>
      <td>-20 ~ 200 ℃</td>
      <td>一般</td>
      <td>常规工况,成本敏感</td>
    </tr>
    <tr>
      <th scope="row">不锈钢</th>
      <td>304 / 316L</td>
      <td>-196 ~ 400 ℃</td>
      <td>高(316L 适用于含氯环境)</td>
      <td>潮湿、腐蚀性介质</td>
    </tr>
    <tr>
      <th scope="row">铝合金</th>
      <td>6061-T6</td>
      <td>-50 ~ 150 ℃</td>
      <td>较高</td>
      <td>轻量化要求、需导热场景</td>
    </tr>
  </tbody>
</table>

<p class="mat-note">
  表中温度范围为材料本体在静态条件下的参考值,
  实际使用温度受结构与工况影响,最终以技术确认为准。
</p>
Fields and parameters
Field / parameterTypeDescription and values
Material categoryTextCarbon steel / stainless steel / aluminium alloy
GradeTextSpecific grade, usable for purchasing and substitution
Service temperatureRange + °CState whether it is a static reference or an operating value
Corrosion resistanceTextGraded, with the specific medium stated
Suitable applicationsTextLets buyers check their own case
Explanatory noteParagraphLimits the validity of the values in the table

SEO and structured-data notes

SEO and structured-data checkpoints
Grades must be specific"Stainless steel" cannot support a purchasing decision; "304 / 316L" is the information a buyer needs
Temperature ranges need conditionsStatic material temperature and real operating temperature differ widely; without a note the figures get misapplied
Corrosion resistance needs a medium"High" carries no information; "316L for chloride-bearing environments" does
Add an applicability noteEvery value in the table has a boundary; stating the boundary is worth more than another row
Keep base metal and surface treatment apartSubstrate and coating are two different things; combining them in one column leads to wrong selection
Stay consistent with product pagesMaterial table values must match the specification table on the detail page

Compliance risk notes

  • Material descriptions must match the physical product
  • Different grades must not be merged into one broad category
  • Claims such as "never rusts" must not be made; they cannot be verified
  • For food-contact or medical use, material wording must comply with the applicable regulation
  • Temperature and corrosion data must not exceed the tested range

Do not reuse this template verbatim in regulated contexts; verify local regulations and platform rules before going live.

Modification example

<!-- Modification example: replace "good corrosion resistance" with usable conditions -->
<!-- Original -->
<tr><th scope="row">Stainless steel</th><td>304</td><td>Corrosion resistant</td></tr>

<!-- Modified: grade + applicable medium + limits -->
<tr>
  <th scope="row">Stainless steel</th>
  <td>304 / 316L</td>
  <td>High for general media; 316L required for chloride or marine environments</td>
  <td>Damp conditions with frequent cleaning;
      304 is not recommended where chloride ions are present</td>
</tr>

<!-- What changed:
     the original "corrosion resistant" is an adjective without boundaries,
     so a buyer cannot choose on it;
     each material now maps to explicit applicable and excluded conditions,
     and the purchasing team can check its own medium directly.
     The 304 / 316L split is spelled out
     to prevent the wrong grade being used in a chloride environment. -->

FAQ

How many rows should a material table have?
Cover the four to six materials you mainly offer. A longer table makes the material decision harder, not easier.
Should price ranges be included?
Not advisable. Prices move with the market and with order volume, so any figure on a long-lived page will go stale.
Should the material table be merged into the specification table?
Keep them apart. The specification table answers "what is this model", the material table answers "why this material"; the question the reader is asking differs.
Can several models share one material table?
Yes, provided the available materials really are identical. Where they differ, split the table and state which models it covers.
Version notes2026-11-20: first release, compiled from official Google documentation and public technical sources; updated as engine rules change. Engine behaviour details follow the latest official Google documentation.

Note: this page is a summary of publicly documented search-engine rules and is for self-check reference only. Engine behaviour is subject to the latest official Google documentation; verify against your own Search Console data.